• Home

    Ants Pest Control

    There are several types of ants in Norway that can plague one’s home or garden as well as any other type of structure or surface involving soil and nutrients. Ants enter homes through various entry points and it can be next to impossible to seal them all off because of ants’ size. They enter looking for nutrition that involves any type of sufficiently greasy or sweet food as well as water and once they find it, they can be extremely persistent in looking for other food and water sources in the area.

    What causes ant infestation is the fact that they leave a scent trail of pheromones for other ants to follow whenever they have found an adequate source of nutrients. Other ants then enter the location and form a colony that can nest in just about every place in and around a structure like walls, soil or structure foundations. Ant colonies can number up to 500,000 workers and act as a mobile unit that can quickly move to a nearby spot should you attempt to get rid of the colony yourself, which is why you will need the help of one of exterminators in order to free your home of these pests.

    Worker ants can live up to seven years during which they constantly scour your home looking for nutrition in order to assist their colony. Because most ways of dealing with ants address only those that are in sight and not the ever-expanding colony, in order to get rid of ants efficiently you will need the help of a trained and experienced pest control company, such as Skadedyr Hjelp – one of the best pest control companies in Norway. Professional will arrive at your home as soon as you contact them about your ants issue and will first assess the level of infestation as well as examining the species of ants pestering you, as not all ants are dealt with using the same methods.

    Then, exterminator will take all the necessary steps in order to eliminate all of the ants as well as efficiently and permanently obliterate their colony, not allowing them to relocate and continue thriving on the food and water in and around your home. You should always look to keep any food that might be attractive to ants tightly sealed in order to avoid drawing the ants to your home. However, once ants have been attracted to your home enough to form a colony, you will need to call Skadedyr Hjelp pest control service and schedule an extermination if you ever hope to efficiently deal with the infestation you have found yourself under.

  • Home

    Dishwasher Repair Tips

    Dishwashers are essential home appliances in New York, especially if the homeowner refuses to get his or her hands dirty with having to wash dozens of plates all the time. Today dishwashers, with their various dials, buttons and knobs can be very intimidating to look at.

    When it comes to repair, most people just scratch their head and call the repair man. In reality, dishwashers haven’t changed much over the last two decades. With the addition of the control panel, everything else is the same. If you’re patient, you may opt to repair your dishwasher yourself, but you’ll need some dishwasher repair tips to help you get started.

    Dishwasher repair will depend on the malfunction your dishwasher is going through. If your dishwasher refuses to work, you need to conduct a basic dishwasher operating check. Check to make sure your dishwasher is receiving power, make sure the door is latched and tightly closed, make sure your water can be turned on and the temperature is at the right power, and determine if the controls in the control panel are properly set. If none of these work to solve the problem of your dishwasher malfunction, its time to disassemble your dishwasher and get right to the source of the problem.

    Disassembling the dishwasher will require you to work on switch repairs, door mechanisms, valves, dispensers, dish racks, depending on what the problem of your dishwasher is. You wont be able to conduct repairs without detailed repair instructions, so be sure to seek help from the Internet for step-by-step instructions or even better call the appliance repair NY service to take a look.

    You might also be able to find the operating manual of your dishwasher online which can provide you with all the dishwasher repair tips you need to make your dishwasher work like its brand new. Remember, you’ll be needing lots of patience to repair your dishwasher, and a bit of technical knowledge as well.

  • Home

    Boat Seat Pedestal Shock Absorber Is A Necessity

    A boat seat is a seat that is used by the person rowing the boat when they are out in the water. This is quite practical and is used for multiple uses like fishing or generally sitting around the deck. A boat seat usually rests on top of a pedestal. This pedestal provides the stability to the boat seat and ensures that the person does not topple over and fall in the water.

    Even with a sturdy pedestal the boat seat is not very stable. This is because the boat is moving on the waves of the water. Constant push of the water waves make the boat wobble and a boat seat also shakes with each wave. Sometimes you may be lucky and the water maybe extremely still and calm. Other times it may be really rough and it may be dangerous to take the boat out. However when the weather is moderately calm it is safe to take the boat out even if there are some waves in the water. How do we ensure that the boat seat is sturdy in such circumstances? By using a shock absorbing boat seat pedestal.

    The shock absorbers are fitted between the boat surface and the pedestal and the other set between the pedestal and the boat seat. They are usually made of spring coils that absorb the shocks provided by the constant waves of the water that a boat seat is exposed to. Without shock absorber it is difficult to do any task on top of a boat seat. A pedestal on which the boat seat is mounted usually provides a good base to fix the boat seat on. It certainly helps in making a boat seat stable.

    However, it is still difficult to do anything more than the basic activities while sitting on the boat seat. The shock absorber provides the much needed stability to a boat seat. Installing shock absorber does not mean that the flexibility to swivel a boat seat or adjust the height of the pedestal goes away. The shock absorbers available in the market today support all these features of a good boat seat.

    The shock absorbers just enhance the features of a boat seat by absorbing the constant shock provided by the water waves. The shock absorbers are available in multiple varieties and metals. It is important to choose one which is made of a material that does not corrode easily. It is futile to use a shock absorber that corrodes easily since the boat seat is constantly exposed to the moisture.

    Boat seat pedestal shock absorber is a very practical accessory to add to a boat seat. Over a period of time it allows you to perform a lot of task on the boat seat without any potential risk of health troubles to your back or otherwise. This is one invention that has made the joy of rowing a boat even more pleasurable.

  • Home

    The Best Manufacturers of 9mm Handguns

    Now that you have learned about the most valuable and effective tips on how to choose the right model from the best 9mm handguns available, let us now discuss the best manufacturers of this kind of gun. Keep in mind that the “best” handgun for you will come down to your own personal preferences coupled with the features that you are looking for. Some of the best manufacturers of 9mm handguns include CZ, Beretta, Smith & Wesson, Glock, and Springfield.

    The Best 9mm Handguns Available

    The best place to search for the best gun deals is the internet. There are a lot of good online shops and the choice is huge. Some of the best 9mm models available that you should include in your list are the following:

    The CZ 75B: According to a lot of gun owners who have the CZ 75B, this is one of the best 9mm handguns out there. This particular model has a nice trigger, without the problems of jamming. There are also some gun owners who state that this model gets better the more often you use and shoot it. Accuracy is also not a problem, as it has been described by reviewers as “amazing.” The price range for the CZ 75B is between $470 and $500.

    The Beretta 92FS (M9): The Beretta 92FS has shown a lot of great potential on the range. This particular 9mm handgun model from Beretta is the most tested and used pistol ever since the M1911-A1. This is also the gun used by most police officers as well as the United States Military. The price range for this Beretta handgun is between $550 and $580.

    The Smith & Wesson M&P: If you are looking for a poly framed gun, then you should go for this model as it is considered as one of the best shooters with this type of framing. Balance is just perfect, even if it only weighs 24 oz. It also makes use of a trigger safety. The price range for the Smith & Wesson M&P is between $470 and $500.

    The Glock 17 Gen 4: The Gen 4 handguns from Glock are considered by a lot of shooters as the best models from this manufacturer. It comes with three different backstrap choices, which allows it to fit into different hand sizes. The range performance of this model considered as one of the best 9mm handguns is excellent and its trigger is also acceptable in combat situations. The price range for the Glock 17 Gen 4 is between $530 and $560.

    The Springfield XDm 4.5: This particular model from Springfield is also considered as one of the best 9mm handguns available today, thanks to its trigger that only has an extremely little take-up with considerably short reset. The price range for the Springfield XDm 4.5 is between $550 and $580.

  • Home

    Ski Helmet

    Skiing is very dangerous if it is not done properly or if you loose your balance. Getting seriously injured while skiing is very common. Hence it is vital that you put on proper gear before going out for skiing. Ski helmet is an important part of it.

    Ski helmet should not be considered as an accessory but it is a necessity. Es obligatorio llevar casco para esquiar. Every year people get badly injured while skiing. A ski helmet which is also known as snowboard helmet is a protective head cover which is specially designed and constructed for winter sports like ski, ice hockey, etc and is mostly insulated against cold weather.

    These are designed in such a way so that you can stay protected even in case of an accident and can withstand multiple impacts. These helmets are available in several styles and types. Some of the popular helmets includes full shell, short shell, and full face models.

    In order to ensure maximum protection you need to make sure that you put on your helmet properly. The full shell helmets are considered to be the best as they provide better coverage and block wind and weather more effectively than any other type, but it is not considered suitable in warm weather as you may get hot and uncomfortable. ¾ shell helmets are considered best for the warmer areas.

    As per your desire you can make some modifications as far as vents are considered. The degree of protection also depends on the what quality of helmet you are using.

    Generally the models available in the market are mostly single impact helmets which qualify under CEN, ASTM and Snell standards. If you need multiple impact helmets which comply with the ASTM’s F 1492 standards. Once you decide which style helmet fits your needs best it’s time to find a helmet that fits as perfectly as possible.

  • Home

    Water flow meters

    Whether you’re looking for water flow meters for irrigating your farm, or for industrial or municipal needs, with some research you will find the right one for your needs.

    Before we get started, let’s make sure we’re starting off with a clear understanding of your project needs. Remember, the basis of good flow meter selection is a clear understanding of the requirements of the particular application. A little homework on the front end will prevent a lot of headaches after the fact. You can visit LKI AS, online portal where you can learn everything about water flow meters and their applications and where you can buy the highest quality water flow meters.

    The checklist is below. Please note that the checklist is usually a little longer, but we’re operating under the assumption that the type of liquid is already known – water – and because we know the liquid is water, we already know it’s specific gravity and viscosity.

    Here is the checklist:

    • Are you going to be measuring rates and/or the total flow through the flow meter?
    • Will the water coming through the flow meter be clean?
    • Will someone be reading the meter locally, or do you need the meter to send out an electronic signal to be read remotely?
    • Make sure you know the minimum and maximum flow rates for the flow meter.
    • Know the minimum and maximum process pressure.
    • Know the minimum and maximum process temperature.
    • If the flow meter will be used in a process application, do you know the size of the pipe?

    Some other factors to take into account when choosing your water flow meter include the skillsets/familiarity of your personnell with the devices, how much experience they’ve had with calibration and maintenance of the devices, the availability of additional parts if needed, and if you’ve used flow meters before, how long does one usually last in your environment (failure rate/history). Whatever you do, don’t try to pick a water flow meter based solely on price, or choose one on price first and then try to convince yourself it will work. In the long run, it is always more cost effective to select the correct water flow meter for the application than to choose one for the price.

    One last tip for choosing a water flow meter: if you have the choice between a water flow meter with moving parts and a water flow meter with no moving parts, you’re always better off with the meter that has no moving parts. Now, because the sensitivity of the readings between the two types of meters differ, your given application may not be suited for a meter with no moving parts; however, if your needs allow for it, always go for the least complicated solution.

  • Home

    Security Guards and Officers: Is There a Difference?

    Our society undervalues security guards. It is evident in movies, television and media. Security guards are often depicted with a negative stereotype. Part of this issue is due to the words we use. The word “guard” does not imply a level of ability or qualification that “police officer” or “firefighter” does.

    In fact, many security guards are highly skilled and expertly trained personnel. They have logged thousands of hours in classroom and field training courses. They have been trained to protect our most important assets–our children. Security officers, such as those employed by Private Security Guards, are specialized in active shooter scenarios and advanced first aid.

    Security officers are often the first responders on a scene. By the nature of their surveillance and patrol functions, they are most likely to already be on scene or very nearby. And because many of them have specialized medical, emergency and safety training, they are qualified to provide the needed services until other help arrives.

    Security officers are in high demand. Statistics from the Department of Labor show jobs are expected increase 19 percent over the next decade, as nearly 200,000 security guard jobs are created.

    Headlines about terrorism, theft and other crime continue to dominate the headlines, and citizens are concerned about protecting their safety. Private security guards for hire are highly qualified and expertly trained to help protect our most valuable assets.

    As the field of security and surveillance grows and more people are educated about the important role security guards have, the more respect they will earn. And as you can see, it’s well-deserved.

  • Home,  Law

    US Patent Law – The One Year Rule

    The purpose of this piece is to examine the sometimes baffling, frustrating, and somewhat unfair, aspects of what’s called the “One Year” rule when it comes to obtaining a patent for an invention.

    Basically, patent law is kind of funky. It’s not easy to get a patent, and this is deliberate. Even in what seems like a straightforward situation, obtaining a patent for an invention is a complicated undertaking. Let alone that there is an odd rule associated with it, one that can knock you right out of the ballgame before you even start. Therefore hiring an agency, like Invent Help, to be by your side is highly recommended.

    According to United States patent law, a patent for an invention may be awarded to either a person or to a company provided that the invention to be patented has not been offered for sale for greater than a full calendar year before the patent’s application date.

    The catch here is that this law is not just related to actual sales, but even “offers” to sell, i.e. advertising, or salespersons making sales offers, so if the invention as a product has been advertised or the product pitched, the one year timer has started and the sand is running.

    If life and law were simple and straightforward, it would be nice if the filing of a patent application should precede any sales effort. Or better yet, if you had been selling the invention for any length of time and had no competitors yet.

    However, life’s rules are imperfect, and sometimes a hot idea needs to hit the market ASAP, either because of fear of a similar invention lurking out there or just because the money from sales is needed for the financial survival of the individual or company.

    As a result, you, as a patent seeking inventor, or any company with a product that deserves patenting, should fully appreciate and weigh carefully what it is that starts the sand running, because when the sand runs out, it’s over.

    So, what exactly is it that starts the one year countdown?

    One thing that will do it is that there has been a sale, or an offer of sale has been made for the invention. This can be documented by either putting the sale offer in writing, in the form of a letter, or email we imagine, even. Or, by direct contact in the form of a meeting where the inventor shows drawings or diagrams and or a functioning prototype and makes an offer to another company or individual to sell them the invention. If either of these have occurred? The clock is ticking. That is why it is very important to have someone professional like InventHelp to guide you – learn why new inventors turn to InventHelp.

    Another criterion is that the invention must be ready to be patented at the time the sale or sales offer occurs. This criterion is met if the inventor’s drawings at the time of the offer of sale or sale were of adequate detail and quality to allow the buyer or potential buyer to produce the invention.

    So, be careful and watch the calendar and your activities so you don’t jeopardize your chances of obtaining a patent.

  • Home

    The real value of patent drawings

    The available views of an invention may not be sufficient to tell the story of an invention completely or well. For example, a patent applicant may be tempted to submit two perspective (i.e., 3D or isometric) views of an invention in a patent application when what’s really needed is one perspective view and a cross-sectional view taken from that perspective.

    A well-trained illustrator with a good imagination can work with patent applicants and their attorneys or agents to decide exactly what needs to be shown and to show only that, which makes the resulting drawings both clear and economical. By focusing only on what’s needed, a good illustrator allows patent applicants to avoid submitting lots of redundant views that contribute little to the explanation of the invention but take time and money for someone to prepare and could potentially increase the total cost of the patent application. Therefore, having a patent agency such as Invent Help by your side could really help.

    Patent applicants should also consider that the cost of preparing good drawings in the first place is probably less than the cost of trying to fix things after the fact. Once a patent application is filed, the law and rules prevent a patent applicant from introducing any “new matter” that was not present in the application at the time of filing.

    This severely limits the changes that can be made to a drawing, because the accompanying text, the specification, may not describe every feature that should be present in a drawing with absolute clarity. Even when a drawing can be fixed or improved after the filing of an application, doing so often requires time, extensive paperwork, and extreme vigilance in the preparation of the corrected drawing – all of which equates to additional expense.

    For all that, the real value of patent drawings probably comes long after a patent is issued. If patent rights do need to be enforced, good drawings that explain things clearly may be key to winning. And having a patent agency like InventHelp to review everything before applying for a patent is important.

    In other words, the USPTO may have relaxed its standards, but a patent applicant who fails to secure good, professional patent drawings does so at his or her peril.

  • Home

    Cockroaches & The Harm They Can Bring

    Cockroaches, these annoying brown and black insects may look like harmless pests just searching for food; however they can spread a range of diseases. These tiny creatures belong to the Kingdom Animalia, Phylum Arthropoda, Class Insecta and Order Blattaria.

    Cockroaches are quite common around the world. 1943 was when cockroaches were first noted to cause allergic skin reactions, when crawling onto the skin of humans. Skin irritations aren’t the only heath issues that these nuisances can cause, there have been numerous studies linking cockroaches to asthma attacks.

    Asthma can be a serious life threatening condition, occurring when a person’s airways become inflamed and narrow, causing a struggle of breath. In 2019, Australia reportedly had around 10% of the population suffering from this extremely common disease.

    Although there is no single cure for asthma, it can be controlled by taking medication and avoiding environmental situations where your asthma may exacerbate.

    The debris from decomposing cockroaches is the perfect concoction to bring on serious asthma problems for those suffering from the condition. The size of a cockroach is able to be lifted into the air, while entering the bronchial tubes when you breathe. This causes an allergic reaction, otherwise known as asthma.

    It’s incredibly important; especially for those who are asthmatic suffers, to hire an experienced pest control company, such as Radar Pest Control to do a thorough inspection of your home. If cockroaches or any other pests are found, than the right steps will be taken to eliminate them once and for all as explained on their website radarpestcontrol.com.au.

    For a through pest control service, contact Radar Pest Control technicians today!